Teltonika TSW010 Din Rail Switch

Teltonika TSW010 DIN Rail Switch – compact industrial 5-port Fast Ethernet switch

The Teltonika TSW010 DIN Rail Switch is a compact and robust Ethernet switch designed for control panels, cabinets and industrial sites. It provides five 10/100 Mbps ports and uses very little power, so it fits perfectly into M2M and IoT projects where reliability is more important than raw speed.

Because it is fully unmanaged and plug-and-play, engineers can deploy the TSW010 without any configuration. You simply connect power, plug in the Ethernet cables and the switch starts forwarding traffic. This straightforward approach helps reduce installation time and avoids the risk of accidental misconfiguration in the field.

The TSW010 includes a rugged anodised aluminium housing and an integrated DIN rail bracket. As a result, it is easy to mount alongside Teltonika routers, DIN-rail power supplies and terminal blocks. It is also rated for -40 °C to +75 °C, which means it can be installed in roadside cabinets, plant rooms and other demanding environments when used in a suitable enclosure.

Key features of the Teltonika TSW010

• 5 x Fast Ethernet ports (10/100 Mbps) with auto MDI/MDIX crossover
• Unmanaged Layer 2 switch for simple plug-and-play operation
• Wide 9–30 V DC power input via 2-pin industrial connector
• Passive PoE-in on ETH1 (Mode B, 9–30 V DC) to power the switch
• Ultra-low power consumption, typically under 1 W in operation
• Rugged anodised aluminium enclosure with IP30 rating
• Integrated DIN rail mounting bracket for quick installation
• Industrial operating temperature range from -40 °C to +75 °C
• Supports IEEE 802.3i, 802.3u, 802.3x and 802.3az standards
• Non-blocking switching bandwidth up to 1 Gbps

Industrial design for panels and cabinets

The TSW010 has been built for industrial environments rather than office desks. It has a compact footprint, so it sits neatly inside electrical panels and cabinets. Because all connections are on the front, wiring is tidy and easy to trace during maintenance.

The anodised aluminium housing provides strength and helps with heat dissipation. In addition, the IP30 rating and wide temperature range make the switch suitable for many harsh environments when used in an appropriate enclosure. This combination is ideal for installers who need a dependable switch that can be fitted once and then left alone.

Flexible power options – DC or passive PoE-in

Power flexibility is often important in remote deployments. For this reason, the TSW010 offers two different power input methods. You can feed it directly from a 9–30 V DC supply using the 2-pin industrial connector. This is usually the cleanest option when you already have a DIN-rail power supply in the cabinet.

Alternatively, the switch can be powered via passive PoE-in on the ETH1 port. A suitable passive injector sends power and data over the same cable, which can simplify wiring for retrofit jobs or compact enclosures. Power consumption remains very low in both cases, which makes the TSW010 suitable for solar or battery-backed systems.

Important note: the TSW010 does not provide PoE out to other devices. Passive PoE is used only to power the switch itself. If you need to power IP cameras, access points or phones, you should select one of the PoE models such as the TSW100, TSW200 or TSW202.

Typical applications for the TSW010

Because the TSW010 is small, reliable and unmanaged, it can be used in a wide range of projects. The following examples show common use cases.

• Industrial control panels – extend LAN connectivity from a Teltonika RUT200, RUT241, RUT901 or RUT956 to HMIs, PLCs and local controllers.
• CCTV and security systems – connect NVRs, encoders and non-PoE cameras in cabinets where a simple Fast Ethernet switch is sufficient.
• Retail, kiosks and digital signage – add ports for tills, media players and controllers behind a single 4G or 5G router.
• Energy and utilities – provide reliable switching for metering, telemetry and local gateway nodes at substations or solar sites.
• Manufacturing and automation – connect several Ethernet-enabled devices on a production line or test rig.
• Transportation and roadside cabinets – support traffic systems, signage, monitoring and sensor networks.

Working with Teltonika routers and RMS

The TSW010 is often paired with Teltonika industrial routers such as the RUT200, RUT241, RUT901, RUT956 and RUTX50. In this combination, the router provides intelligence, firewalling, VPNs and remote access, while the TSW010 simply expands the number of wired ports.

When the router is managed through Teltonika RMS (Remote Management System), you can control the router configuration, monitor status and manage VPN connections from a central portal. Meanwhile, the TSW010 requires no management at all. It quietly extends the wired LAN behind the router, which keeps networks simple and stable.

Technical summary

• Ethernet ports: 5 x RJ45, 10/100 Mbps, auto MDI/MDIX
• Switch type: unmanaged Layer 2 Fast Ethernet
• Supported standards: IEEE 802.3i, 802.3u, 802.3x, 802.3az
• Switching capacity: 1 Gbps non-blocking
• Jumbo frames: up to 2048 bytes
• MAC address table: 2K entries
• Power input: 9–30 V DC via 2-pin connector or passive PoE-in on ETH1 (Mode B)
• Power consumption: approximately 0.3 W idle and 0.9 W maximum
• Enclosure: anodised aluminium, IP30
• Dimensions (W x H x D): about 113.1 x 27.4 x 80.5 mm
• Weight: approximately 146.5 g
• Mounting: integrated 35 mm DIN rail bracket, optional wall or flat-surface mounting
• Operating temperature: -40 °C to +75 °C

Why buy your Teltonika TSW010 from 3G Router Store?

3G Router Store is part of Millbeck Communications, a long-established UK supplier of Teltonika Networks hardware. We focus on industrial connectivity, so we understand how these products are used in real projects. As a result, we can help you choose the right combination of router, switch, IoT SIM and antenna for your application.

• UK-based stock and knowledgeable technical support
• Project and trade pricing available on request
• Help with complete solutions including IoT SIM cards and antennas
• Advice based on real-world deployments across security, energy, transport and industrial automation

Frequently Asked Questions – Teltonika TSW010

Does the Teltonika TSW010 provide PoE power to connected devices?

No. The TSW010 does not provide PoE out on any port. The passive PoE feature is used only to power the switch itself through the ETH1 port. If you need to power cameras, access points or phones, you should choose a PoE model such as the TSW100, TSW200 or TSW202.

What is the difference between TSW010 and TSW100?

The TSW010 is a 5-port Fast Ethernet (10/100 Mbps) unmanaged switch with no PoE output. It is aimed at simple, low-power industrial networks. In contrast, the TSW100 is a 5-port Gigabit switch with four 802.3af/at PoE+ ports that can power compatible devices. Therefore, TSW010 is ideal when you only need basic connectivity, while TSW100 suits projects that need higher speeds and PoE.

Can I use TSW010 in harsh industrial environments?

Yes. The switch has a metal IP30 enclosure and operates from -40 °C to +75 °C. When it is mounted inside a suitable cabinet or enclosure, it can be used in many industrial and roadside locations. This makes it a good fit for energy, utilities and traffic applications.

Is any configuration required before using the TSW010?

No configuration is required. The TSW010 is an unmanaged Layer 2 switch with no web interface and no command-line access. You simply power it up and connect your devices. Because there is nothing to configure, there is also nothing for users to misconfigure later.

Can I connect the TSW010 to Gigabit routers and uplinks?

Yes. You can connect the TSW010 to Gigabit-capable routers such as the Teltonika RUTX series. However, all ports on the TSW010 operate at 10/100 Mbps, so connected devices will run at Fast Ethernet speeds. This is normally more than enough for control, telemetry, metering and many CCTV or kiosk systems.

How do I power the Teltonika TSW010?

You can power the switch using a 9–30 V DC supply on the 2-pin industrial connector. This is the most common method for new installations. Alternatively, you can feed power in through passive PoE-in on the ETH1 port by using a suitable passive injector. Both methods give the same performance, so you can choose whichever best suits your wiring plan. If you need a power supply for this switch then we recommend the PR3PRUK6.

Is the TSW010 visible in Teltonika RMS?

The TSW010 is not a managed switch, so it does not appear as a separate device inside Teltonika RMS. Instead, you manage the Teltonika router in RMS and use the TSW010 purely as a simple Layer 2 extension of the LAN. This keeps the design clean and reduces ongoing administration.

What mounting options does the TSW010 support?

The switch includes an integrated 35 mm DIN rail clip, which means it can be installed directly onto standard DIN rail in most cabinets. With an appropriate mounting kit, it can also be fixed to a wall or a flat surface. In every case, front-facing connectors help keep the wiring neat and easy to service.