Teltonika PR3P2UK3 – 24W UK PSU

Teltonika PR3P2UK3

Teltonika UK Power Supply 24 W (PR3P2UK3)
This is the official 24 W UK power supply for Teltonika networking products. It delivers a regulated 12 V DC, 2 A output through a 4-pin connector, making it the correct choice for a wide range of Teltonika routers and accessories that require a 12 V supply.

Using the manufacturer’s own PSU means you do not have to worry about voltage, polarity, connector wiring or safety approvals. It is the recommended way to power Teltonika hardware in professional installations.

Designed for UK mains and global input range
The adapter uses a UK Type G mains plug and supports a wide 100–240 V AC input range, so it works on standard UK mains and can also be used in other regions with compatible sockets. The unit is intended for indoor use and is suitable for comms cabinets, equipment racks and office or industrial environments.

The 24 W rating gives enough headroom for most single-router installations, small accessories and low-power networking devices without stressing the PSU.

Optimised for Teltonika routers and accessories
This 24 W supply is ideal for powering Teltonika routers and devices that specify a 12 V DC input, such as selected RUTX series and other compatible models. The 4-pin, 3 mm pitch output connector matches Teltonika’s standard power inlet so it plugs straight in with no modification.

If you are upgrading from an older or non-original adapter, this power supply ensures the device receives the correct voltage and current, which helps prevent random reboots and stability issues often caused by under-rated or poor-quality supplies.

Industrial-grade design and protection
The PR3P2UK3 is built for continuous operation in demanding environments. Key characteristics include:

• Stable 12 V DC output with tight tolerance
• Up to 2 A output current for 24 W total power
• Short-circuit protection on the output
• Electrical isolation between primary and secondary
• Compliance with recognised EN safety and EMC standards

This combination of performance and protection makes it suitable for professional and industrial use rather than light domestic applications.

Typical applications
You would typically use this power supply for:

• Teltonika RUT and RUTX routers that require 12 V DC input
• Small industrial networking nodes in control panels
• Retail and point-of-sale routers and gateways
• Remote monitoring equipment where reliable 12 V power is required
• Powering compatible Teltonika accessories and small devices that use the 4-pin connector

Its compact form factor and cable length make it easy to route and secure within control cabinets and comms enclosures.

Key technical details

• Output power: 24 W
• Output voltage: 12 V DC
• Output current: up to 2.0 A
• Output connector: 4-pin, 3 mm pitch
• Input voltage: 100–240 V AC (90–264 V range)
• Input frequency: 50–60 Hz (47–63 Hz range)
• Input connector: UK Type G mains plug
• Protection: short-circuit protection and safety insulation
• PSU type: indoor AC-to-DC desktop adapter

Ordering information

• Model: PR3P2UK3
• Description: Teltonika UK Power Supply, 24 W, 12 V DC, 4-pin output

If you are unsure whether this is the correct PSU for your Teltonika router or accessory, check the device power specification for 12 V DC input and 4-pin connector, or contact us to confirm compatibility before placing your order.