Teltonika PR315PS3 24W PSU Universal Plug

PR315PS3 24w psu

Teltonika UK Power Supply 24 W (PR3P2UK3)
This is the official 24 W power supply from Teltonika, designed for UK mains (Type G plug) and suitable for industrial networking deployments. It provides a regulated 12 V DC output at 2 A, suited for a wide range of Teltonika routers and accessories that specify a 12 V input.

Selecting the manufacturer-approved PSU removes guesswork around voltage, connector type and safety compliance. This ensures your Teltonika device is supplied with the correct and stable power, avoiding issues caused by underpowered or non-certified adapters.

Designed for UK and wide input range
With an input range of 100–240 V AC (typical) this adapter works on UK mains as well as installations worldwide (with appropriate plug or adapter). Inside, it is built to industrial standards with proper insulation, layout and protections. The desktop form-factor allows easy placement inside cabinets, racks or near equipment.

Because it is rated to 24 W you have sufficient headroom for typical router usage (router + modem + small attachments) without pushing the PSU to its limit — that contributes to longer life and fewer thermal or reliability issues.

Optimised for Teltonika routers and accessories
This power supply is aimed at devices listing 12 V DC input and using the Teltonika 4-pin, 3 mm pitch connector. If your hardware is from Teltonika and calls for 12 V, this adapter gives the correct match and is recommended over generic supplies.

By using the correct adapter you protect your investment, enhance reliability and align with best-practice for industrial or IoT deployments.

Industrial-grade design and protection
Despite the modest wattage, this PSU offers robust features:

• Stable 12 V DC regulation (nominal)
• Up to 2 A current output to deliver full 24 W
• Short-circuit protection on the output
• Primary-to-secondary isolation and safety insulation
• Certifications for safety and EMC (industrial performance)

This makes it suitable not just for domestic use but for control panels, deployment racks, remote sites or other scenarios where equipment uptime matters.

Typical applications
You would choose this PSU for:

• Teltonika routers requiring 12 V DC input (e.g. RUTX or similar models)
• Networking equipment in CCTV, access control or building management systems that is powered at 12 V
• Remote monitoring sites or IoT/M2M deployments where a reliable 12 V power supply is needed
• Installs where you want the original manufacturer accessory rather than “off-the-shelf” generic

It offers the correct voltage, connector and performance you expect when installing Teltonika gear.

Key technical details

• Output power: 24 W
• Output voltage: 12 V DC
• Output current: up to 2.0 A
• Output connector: 4-pin, 3 mm pitch
• Input voltage: 100-240 V AC (typical)
• Input frequency: 50-60 Hz
• Input connector: UK Type G mains plug
• Protection: Short-circuit protection, safety isolation
• Suitable for indoor use and installation near equipment

Ordering information

• Model: PR3P2UK3
• Description: Teltonika UK Power Supply 24 W, 12 V DC, 4-pin output

If you are not sure whether your device uses 12 V DC input and the Teltonika 4-pin connector then check the device’s specification or contact us for compatibility advice before purchase.