The Poynting 4G XPOL-1 antenna is now End of Life. The replacement for this is the XPOL-1-5G 2x2 MIMO Cross Polarised Antenna
. The XPOL-1-5G covers the 700Mhz & 3.4GHz bands future proofing your installation for 5G.
The Poynting Cross Polarised 4G LTE Antenna provides an innovative and future proof solution for 4G / 3G and 2G networks. It is a unique window, wall or pole mountable, dual polarised, full LTE band omnidirectional antenna. Incorporating two separately fed ultra wideband elements in a single housing, the antenna is equipped to provide client side MiMo and diversity support for the networks of today and tomorrow. Gain is min. 4 dBi across all bands: 790-960, 1710-2170, 2300-2400 and 2500-2700 MHz Bands.
The weatherproof housing is designed for window, mast and wall mounting. The antenna has 2 x 5 metres of low loss cable with SMA antenna connectors.
This is a cost effective value added product for signal enhancement and ensures higher throughputs and stable links for subscribers. This will improve subscribers' user experience and improve client retention. It is ideal for any applications using the GSM network (LTE/HSPA/3G/EDGE/GPRS).Features:
Window, wall or pole mount
Waterproof Application areas:
Least Cost Routers
GSM customer premises equipment
Gain (Max) 4 dBi
Input Frequency 790-960, 1710-2170, 2300-2400 and 2500-2700 MHz Bands
VSWR across operating bands < 2:1
Feed power handling 10W
Input impedance 50 Ohm (nominal)
Polarisation 2 x Linear (Vertical and Horizontal)
Cable 2 x 5m HDF 195
Cable Loss:0.35Db/m @900 MHz0.53Db/m @ 2000 MHz0.6Db/m @2500 MHz
Connector 2 x SMA male Mechanical:
Mounting Window, wall or pole
Dimensions (l x w x h) 234 x 134 x 84 mm
Radome Colour RAL9001 Cream/grey
Flammability Rating UL 94-V0
RoHS Compliant Environmental:
Operating temperature -45°C to +45°C
Environmental Conditions Outdoor/Indoor
The Poynting Cross Polarised Outdoor 4G Antenna is ideal for use with our range of 4G Routers that use MiMo Antenna configuration like the Proroute H685 and H820 4G Routers. The antenna is supplied with two antenna cables that connect to the Main and Aux ports of the router.PLEASE NOTE : This antenna provides circa 4dBi Peak Gain so should be positioned in a location with a strong signal in order to provide a benefit to your 3G/4G router installation. We do not recommend using antenna extension cables with this antenna - if you need a longer cable length then we recommend using the Fullband® MIMORAD 6dBi Gain antenna which, with the higher gain, can compensate for a longer cable length.FAQ
Q. Can I use antenna extension cables with this antenna?
A. It will entirely depend upon the location you install the antenna - if it is in a position with exceptional signal strength then the signal loss along the extra length of cable will be compensated by the strong signal at the antenna position. HOWEVER - This antenna only has a 4dBi Gain so if installing it in a medium or poor signal area then the signal loss along the extended cable length might result in a poor or low level signal. We would recommend if you need to use a longer cable length then use the Fullband MIMORAD 4G antenna which has a higher gain and better performance to use with longer cable lengths. Dont's forget - if you are buying antenna extension cables then you will need two cables becuase the Poynting MiMo antenna has two antenna cables.